SmokeSabre is a major step forward in the design of aerosol smoke detector testers. All other pressurised aerosol smoke alarm testers have the inherent drawback that, if used too close to the detector, they leave harmful residue on the casing and / or inside the chamber of the detector. This residue can discolour the casing, can attract dust, affect sensitivity and, in some cases, lead to corrosion, cracking or even complete failure of the detector.

SmokeSabre inhibits use too close to the detector and eliminates harmful residue while focussing and targeting the canned smoke test gas.

When SmokeSabre is in the closed position the sabre prevents access to the spray button. You can spray only when the sabre is fully extended. In use, air is drawn through the holes in the sabre and this, coupled with the venturi effect involved, assists the velocity and vaporisation process of the airborne ‘smoke’ particles. The result is a more effective test, delivering better detector activation, using less gas per test, and reducing costs while eliminating harmful residue.

SmokeSabre is a universal test product covering the sensitivity range of all smoke detectors (see particle size comparison chart).

The extending sabre is made of 100% biodegradable plastic making SmokeSabre the only smoke detector test aerosol to be both recyclable and eco-friendly*.

SmokeSabre is UL listed, meets global testing standards, and is approved by major smoke detector manufacturers.


  More tests per can
  Faster detector activation and clearing
  Lowest cost per test
  The end of harmful residue - risk is designed out with the sabre
  Silicon free testing
  Eco-responsibility - 100% bio-degradable sabre, ozone friendly, no CFCs and GWP free propellant*
  Detector manufacturer endorsement and UL Listing
  150ml can

Using SmokeSabre

Testing with SmokeSabre aids compliance with codes and standards globally.

“Point smoke detectors should be functionally tested by a method that confirms that smoke can enter the detector chamber and produce a fire alarm signal (e.g.: by use of apparatus that generates simulated smoke or suitable aerosols around the detector). It should be ensured that the material used does not cause damage to, or affect the subsequent performance of, the detector...”
BS5839 1: 2002; 45.4 (D)
“...the detectors shall be tested in place to ensure smoke entry into the sensing chamber and an alarm response.”
NFPA 72 Chapter 10 ( 3g)


Smoke Tester

SmokeSabre inhibits use too close to the detector and eliminates harmful residue while focussing and targeting the canned smoke test gas.

Download Reference
Smoke Tester    


Name: Marivic S. Lingat

Sun: +63-943-449-2655
Smart: +63-928-147-3889
Globe: +63-995-171-1676

Cebu City Office
Ground Floor SUGBUTEL Bldg. S.Osmeña Blvd.
Corner Road East North Reclamation Area (Near SM City)
Cebu, 6000 Philippines
Tel#: (032) 266 - 7122 | (032) 260 - 1174

Cagayan De Oro Branch
2nd Floor ORO Holiday Appliance Plaza Bldg.
Osmeña Extension St. (Beside Capitol University - Back Gate)
Cagayan De Oro City, 9000 Philippines
Tel#: (088) 880 - 1821

Metro Manila Branch
Suite 815, Ortigas Bldg.,
Ortigas Avenue(In-front of Meralco Bldg.)
Pasig City, Philippines
Tel #: (02) 632 - 0720 | (02) 754 1893

Davao City Branch
Ground Floor, Bajada 88 Bldg. J. P. Laurel Avenue
(In front of Robinson Cybergate)
Davao City ,8000 Philippines
Tel#:(082) 224-3785


Iloilo Branch
Ground Floor, ATM Business Center
(Near Robinsons Place) Corner Jalandoni
Ledesma Street, Iloilo City, Philippines
(033)323-3824 | +63-9568568956


Tacloban City
Solar Surveillance System
109 Paterno St. Corner Zamora St.
Tacloban City, Philippines
Tel#: (053) 523 - 0916

Home | About us | Contact us | Services | Career | Terms of use | Privacy Statement | Trademark & Copyright Disclaimer

Copyright © 2013 Gigaworkz Technologies, All Rights Reserved